Manager Table 002
Office table with robust structure and good stability with levelling adjustment to adjust with the uneven floor surface.
TOP:- 25mm tabletop made up of 25mm thick both side pre-laminated particle board. The edges are machined to have chamfered edges gives the look of waterfall Edge. The top is fixed on metal structure and gives a floating look due to angled cutting.
UNDER STRUCTURE:- Under structure of the table is a combination of two C type leg and two cross-members joined together with the help of special connecting brackets. The vertical member of the leg is made up of M.S. square pipe of 50X50X1.6mm thickness and horizontal member of M.S. square pipe 40X40X1.2mm thickness. The Cross members are lip sections of 40X40 made out of 1.6mm thick CRCA sheet. The cross members and leg are Clamped together with the help of one-way block made up of di-casted MAZAK alloy. Provision of Special Leveler Brackets and end closing caps.
MODESTY:- 15mm thick pre-laminated particle board panel of 450mm width is used as modesty fixed on holding bracket.
PEDESTAL AND SIDE STORAGE
Below table drawer unit with two books and one file drawer.
Combo storage with three drawers and two shutters with good storage capacity usable as return storage for office storage.
TOP:- 25mm thick top made up of 25MM thick pre-laminated particle board.
CARCASS:- Side panel, bottom panel and skirting is made up of 18mm thick pre-laminated particle board is fixed with the back panel by proper grooving done on the back panel which is made up of 9mm thick pre-laminated particle board. Provision of the leg made up of aluminium Sq. pipe of size 50X50 fixed below pedestal bottom with the help of Metal plate of size 80X80X1.5mm thick. There is provision for a pedestal structure (i.e. two book drawer and one file drawer) and two Openable storage place with an adjustable shelf within.
DRAWER:- Provision of two books drawer of size 316(W) X 350(D) X 80(H) and one File Drawer of size 316(W) X 350(D) X 225(H) made up of 12mm thick pre-laminated particle board with the bottom panel of 9mm thickness. The small drawers are mounted on the telescopic slide with 3/4 extension. Where big drawer mounted on the telescopic slide with a full extension allowing storage of files with the help of file manager. Drawer facia made up of 18mm thick pre-laminated particle board. Provision of centralize locking for all three drawers. D type slim in look aluminium alloy handles is provided.provision of D Type handles.
SHELF AND SHUTTER:- Two adjustable shelf with three-point adjustment of 64mm from the lower position reference point, supported on shelf support lug made up of 18mm thick pre-laminated particle board & two shutters of Lighter shade made up of 18mm thick pre-laminated particle board mounted on 0 crank hinges with the provision of D type aluminium alloy slim handle. Both the shutters are lockable with the help of multipurpose square lock and tower bolt.